Arc Gouging

The SLICE Cordless Striker Pack is the latest addition to the complete line of exothermic cutting equipment. The SLICE cordless striker uses two small lead-acid batteries to supply a current surge sufficient enough to ignite both the 1/4" and 3/8" bare Slice Cutting Rods.

You no longer need the cables that run from a torch and striker to the battery. All of this has been put in the hand held striker igniter. When it is time to recharge just insert the igniter into one of the receptacles on the recharging unit. The red light will come on indicating the unit is charging. When the green light comes on the igniter is recharged and ready to go. The recharging unit is capable of charging two igniters at a time, in less than 4 hours.

Rod Burntime: Listed are the approximate burntimes for the various SLICE® rod diameters and lengths: 1/4? x 22? 40-45 seconds 1/4? x 44? 80-90 seconds 3/8? x 18? 30-35 seconds 3/8? x 36? 60-70 seconds

Item: Arc Slicer Utility Pack

Type: Exothermic Cutting System

Application: For Cutting Stainless, Alloy Steels, Cast Iron, Aluminum, Magnesium, Non-Ferrous Metals, Slag, Refractory Materials, Concrete and Brick

Requires: Oxygen and 12 Volt Battery

Regulator: Not Included

CFM @ PSI: 7.5 CFM at 80 PSI

Includes: Torch, 1/4 In Collet, Torch Shield, 10 Foot 1/4 In ID Oxygen Hose, Striker with 10 Foot Cable, Carrying Case

Pressure Regulators: Not Included