Chemicals/Coatings/Flux

Features:

#Non-toxic and non-flammable

#Provides hours of protection from splatter build-up on MIG gun nozzles and contact tips

Temp. Range: 1000.0 °F [Min]

Flash Point: 425.00 °F

Specific Gravity: 1.4280

Physical Form: Semi-Solid

Odor/Scent: Odorless

Type: Anti-Spatter Coating

16 oz. container

FEATURES:

Multi-purpose lubricant, penetrant and corrosion inhibitor

Displaces and seals out moisture, especially after washing or hosing off engines or equipment.

Penetrates through corrosion to loosen frozen parts.

Lubricates without leaving a sticky residue.

Cleans light soils and contaminants.

Prevents 'fingerprinting' by its protective film.

Protection of all metals and alloys.

Compatible with most painted surfaces, coatings, plastics and rubbers.

Equipped with the 360° (upside-down) spray valve for added convenience.

Pressurised with non-flammable CO2 propellant.

Active product content of 97%.

Specifications : NSN 6850-00-050-0659.

16 oz. Aerosol

APPLICATIONS:

PROCESS MANUFACTURING:

MACHINING :

SPECS:

Item: Lithium Grease

Type: Aerosol

Size: 10 oz.

NLGI Grade: 2

Color: White

Temp. Range: 0 to 300 Degree

# White color makes it easy to visually inspect film coverage.

# All-weather use. NSF H2 Registered.

16 oz. Aerosol Can

Helps prevent heat damage to components and surrounding materials during soldering, brazing and welding.

Unique gelled formula sticks to surfaces without dripping or running off

Clear, non-staining gel leaves no residue eliminating cleanup.

Safe, non-toxic, harmless to skin and odorless.

Protects painted and finished surfaces from discoloration due to adjacent torch operations.

Protects adjoining areas made of wood, wallboard, insulation, etc.

16 oz. Spray Bottle

#Meets Mil. Spec. Mil.-A-907E

#Copper-based anti-seize and lubricating compound.

#Resists rust and corrosion

#Recommended for coating nuts, bolts, valves, flanges, splines for easy break out after years of service.

Authorized by USDA for use in federally inspected meat and poultry plants.

10 oz. angle brush-in-cap

All-State Brazaloy No. 1 Blue General Purpose Flux is a granular flux designed for braze welding of cast iron, malleable iron, steel, copper, brass and bronze. Flux may be used with complete satisfaction for copper and copper alloys except aluminum bronze.

Designed for brazing cast and malleable iron and steel, for torch welding brass, bronze and copper.

Working Range: 1200 - 1600 degrees F.

Glassy Residue can be removed by water; quench while the joint is hot.

#Net Weight = 1lb.

Designed for brazing cast and malleable iron casting at medium and high heat. It is unique formulation-blending flux and metal to synergistically perform at temperature.

#Working Range: 1400 - 2200 degrees F.

#In addition to dipping the heated end of the filler rod, sprinkling the flux into the molten puddle will float oxides.

#Good results obtained by using cast iron roads that meet AWS specification A5.15-56T

#1lb. container