• Made of Leather
• Designed to hold Klein bull pins (and all other standard bull pins).
• Riveted to assure long life.
• Slotted to fit belts up to 2" (51mm) wide.
• Made of No.4 canvas with double bottom
• Bolt bag with bull-pin loop on each side
• Fits belts up to 3" (76mm) wide.
Klein Tools Canvas BullPin and Bolt Bag w/ Tunnel Loop
Made of No.4 canvas with double bottom.
Bolt bag with bull-pin loop on each side.
Tunnel loop fits belts up to 3" (76mm) wide).
Durable, straight-wall and tapered-wall buckets are made of heavy-duty canvas.
Polypropylene-rope handle reinforced with leather for water resistance and strength.
High-density polyethylene top ring for strength and chemical resistance.
Made of tough No.4 canvas.
Heat-resistant, hard-leather bottom.
Web loop for sliding over belt.
Made of leather
Has slots for two erection wrenches
Tunnel loop is riveted to assure long life
Fits belts up to 3-1/2" (89mm) wide
• Strong, heavy-duty leather
• Equipped with a double-tongue buckle
• Size (Length):LARGE, 40-48 Inches, 1016-1219 mm
• Width: 2 Inches, 51 mm
• Riveted to assure long life
• Pockets for pliers, screwdriver, folding rule, and open end wrenches.
• Also includes a knife snap.
Size: Large Large: Fits sizes 40" to 48" (102-122 cm)
2" (51mm) wide, embossed, extra-heavy strap leather belt with double-tongue buckle
Separate reel-strap with single-tongue buckle allows easy attachment and removal of Klein tie-wire reel
SIZE: Medium Medium: Fits sizes 36" to 44" (914mm - 1118mm).
Belt is 2" (51mm) wide
Made of strong, heavy-duty leather with embossed basket-weave pattern.
Has a strong double-tongue buckle with a keeper
Separate reel-strap allows easy attachment and removal of the Klein tie-wire reel
SIZE: Small
Small: Fits sizes 32" to 40" (81-102cm)
2" (51mm) wide, embossed, extra heavy strap leather belt with double-tongue buckle
Separate reel-strap with single-tongue buckle allows easy attachment and removal of Klein tie-wire reel
SIZE: X-large Extra Large: Fits sizes 44" to 52" (112-132 cm)
• Made of soft Leather
• Deep pocket for bolts
• Bull-pin loops on each side
• Tunnel loop fits belts up to 3" wide
SIZE: Large
Made of Leather with double bottom
Bolt Bag with bull-pin loop on each side
Fits belts up to 3" (76mm) wide.
• Large: Fits sizes 38" to 46" (965mm - 1168mm).
• Made of strong, heavy-duty leather.
• Removable single-tongue buckle is held by two heavy-duty snaps.
• Belt is 1-1/2" (38mm) wide.
• Pockets fitted to hold side-cutting pliers and folding wood rule.
• Tunnel loop fits belts up to 3-3/4" wide
• Leather Construction
• Cut-out sides for easy access to tape
• Slotted for attaching to belts up to 2-1/2" (63mm) wide.
• ONLY FOR 20' to 25' TAPES.
• Overall Size: 4-1/2" x 7" (114mm x 178mm)
• Designed for tools with hang holes
• Slides on belts up to 4" (102mm) wide.
• Cut-out sides for easy access to tape.
• Holds a large sized power-return rule up to 3-3/4" x 2-1/4" (95 mm x 51 mm)
• Slotted to fit belts up to 2-1/2" wide.
• Snap-on strap secures rule.
• Designed for tape rules equipped with belt clips
• Easy to attach - no need to remove belt of harness
• Clip holder accept most tape clips up to 1-1/4" (32mm) wide.
• Tunnel loop with snaps fits belts up to 4" (102mm) wide.
• Made from heavy duty vegetable tanned cowhide for strength and durability.
• Two compartment design allows easy storage of different rod sizes.
• Heavy duty rivet reinforcement.
• 3/4" thick wood bottom resists sharp ends.
• Extra wide 4" belt loop
