|
Hobart Handler 210 MVP Mig Welder -- 500553 WITHOUT Spool Gun
The Handler 210 MVP is the one portable MIG Welder that has 210 amps of welding power packed into a portable case. Powerful output to handle 3/8" thick mild steel and enough control for 24 guage material.
Features:
- Max 210 amps in small, portable case - Sized for transport of the unit to the job site and the power to weld 3/8 in. mild steel.
- 7 voltage selections - Permit easier fine control of the output parameters for improved arc, less spatter, better bead appearance, excellent penetration and minimal post-weld cleanup.
- Direct plug spool gun circuitry standard - Optional SpoolRunner 100 spool gun plugs directly into the Handler 210 MVP – no additional adapters or control boxes needed! Just remove the standard MIG gun and replace it with the optional SpoolRunner 100 spool gun, flip the switch on the center panel from “MIG Gun” to “Spool Gun” and you’re ready to go.
- Proven built-in wire feeder with quick-release tension lever - Provides positive feed with adjustable tension. Easy access for threading wire.
- Replaceable, built-in contactor - Eases use and excellent safety feature. Makes the welding wire electrically “cold” when not pulling the trigger.
- Convenient polarity changeover with tip holder - Access makes it quick and easy to change polarity when switching from solid wire to flux cored wire. Includes convenient storage holes for spare tips.
- Quick-change, dual groove drive rolls - Easy to change from one wire diameter to another .023/.025 in. or .030-.035 in.
- Short circuit protection - Protects the unit against current overload.
- Self-resetting thermal overload - Protects power transformer to ensure reliability.
- Solid-state motor protection - Protects wire feed system from overload.
- 5/3/1 Industrial Warranty AND Technical Assistance - Five-year warranty on transformer and stabilizer; three years on electronics (drive motors, PC boards) and one year on MIG gun. Worldwide service network and 1-800-332-3281 Tech Help Line for prompt service and assistance.
- Hobart Exclusive! Multi-voltage plug (MVP™) allows you to connect to common 115 or 230 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle and connect it to the power cord.
SPECIFICATIONS:
| Input Power |
Rated Output |
Current Range |
Max-Open Circuit Voltage |
Wire Feed Speed Range |
Amps Input @ Rated Output, 60 Hz, 1-Phase 115V 230 V KVA KW |
| 115 V |
90 A,19 VDC at 20% Duty Cycle On 60 Hz |
25–140 A |
28 V |
40-680 IPM 60-770 IPM At no load |
20 ---- 2.9 2.5 |
| 230 V |
150 A, 23 VDC At 30% Duty Cycle On 60 Hz |
25-210 A |
34 V |
---- 24 5.4 4.6 |
| Dimension |
Net Weight |
| H:12-3/8” W:10-5/8” D:19-1/2” |
79 LB. |
Includes:
• Comfortable 10-ft. H100S4-10 gun
•10-ft. work cable with clamp
•Built-in gas solenoid valve and dual-gauge regulator with gas hose
•Spool hub assembly accommodates 4 or 8 in. spools
•Sample spool of .030 in. self-shielding flux-cored wire
•.030 in. contact tips
•10-ft. power cord with 5-15P (115 V, 15 A) and 6-50P (230 V, 50 A) MVP plugs
•Weld set-up chart
•Owner’s manual with parts lists, installation, operation and maintenance guidelines
Download Hobart Handler 210 MVP Spec Sheet (CLICK HERE)
|
