Hobart Handler 140 Mig Welder - 115 Volt, 140 Amp (500559)
The Handler 140 operates off 115 volt standard household current for maximum versatility. Comes ready to weld with or without shielding gas, no additional kit required. With an amperage output range of 25 - 140, it easily handles a broad selection of solid mild steel or stainless, flux cored and aluminum wires.
Summary
- Comfortable 10 ft. (3 m) H100S2-10 MIG welding gun
- Built-in gas valve
- Regulator and gas hose
- Power cord with plug
- 10 ft. (3 m) work cable with clamp
- Sample spool of .030 in. (0.8 mm) self-shielded flux cored welding wire
- 8 in (203 mm) wire spool adapter
- Extra .030 in. (0.8 mm) contact tips
Features
- Welds 24 gauge up to 1/4 inch in steel
- Proven built-in wire feeder with quick-release drive roll lever
- Built-in contactor eases use and is an excellent safety feature which makes wire electrically "cold" when not welding.
- Four output voltage settings with wire feed tracking provide quick and easy adjustment for different materials and thickness.
- Easy access to polarity changeover includes storage holes for spare tips
- Dual groove drive rolls make it easy to switch between .023/.025 in. (0.6 mm) and .030 - .035 in. (0.8 - 0.9 mm) wire
- Self-resetting thermal overload and motor protection
Specifications
- Rated Output at 20% Duty: 90A @ 18.5 VDC
- Cycle: 63 A @ 21 VDC (CSA Rating)
- Current Range: 25 - 140 Amps
- Max Open Circuit Voltage: 28 Volts
- Wire Feed Speed Range with load: 40 - 700 Inches per Minute
- Wire Feed Speed Range w/o load: 50 - 740 Inches per Minute
- Amps Input @ 115V: 20 (15 is CSA rating)
- Rated Load, 60 KVA: 2.9 (2.2 is CSA rationg)
- Hertz KW: 2.5 (1.77 is CSA rating
Dimensions
- Height: 12-3/8"
- Width: 10-5/8"
- Depth: 19-1/2"
- 57 lbs
